- Read An Opinion On:
- Outdoor Furniture New York
By Adrianna Norton
Every home is required to have a septic tank to safely remove waste. The septic tank system is an underground system that treats and gets rid of waste water. The septic tank itself is a large box type unit that is typically constructed of fiberglass or concrete. The waste is cleansed and the clean water returned to the water table. As a homeowner, you will have maintenance and other related costs to keep your septic tank system running efficiently.
In the septic tank system, waste water from the home travels through a pipe and enters the septic tank. Once cleansed, the clean water is carried out of an exit pipe. Maintaining a septic tank involves having the tank pumped about every 2 years or so, depending on the size and amount of waste the tank treats yearly. Most professional plumbers recommend a 1000 gallon septic tank be pumped every 3 years. If the tank is in use a lot, you should get it pumped every 2 years. The purpose of getting the septic tank pumped is to get rid of the accumulation of thick sludge and hardened matter. It helps keeps the tank in good working order. As well, there are bacteria activation septic products that contain microbes that digest the waste you flush down your toilet in order to keep sewer lines clean and clog free. Microbes digest and clean waste, bad bacteria, viruses, and other hazardous matter. These microbes will settle in the tank and digest the waste in the tank. Adding activated bacteria in your septic system should be done once a month as part of maintaining the septic tank and sewer line pipes.
. There is considerable expense involved with installing a septic tank. If you are planning on installing a septic tank, you will need a septic tank, sewer pipes, installation permit, and the appropriate spot to install the tank. The location of the tank and lines is dependant upon the results of the percolation test. Each septic system can hold a precise amount of waste so it is essential that you buy the right size so you do not exceed the capacity and end up with a big expensive mess. You will have to hire professionals to dig and place the tank into the ground and run the sewer lines up to the home. The price of a septic tank will vary according to size and material of which it is constructed. A 1,000 gallon septic tank can range from $550 – $850. The cost of installing a standard septic tank can be as much as $2500. A three bedroom home will usually have a 1,000 gallon tank. Based on the total water usage of a home, the recommended tank size for up to 500 gallons per day is a 900 gallon tank, and up to 700 gallons per day, a 1,200 gallon tank is sufficient. Make sure you check with your local governmental official to obtain their specific regulations about tank size and the specific permits needed.
Replacing a septic tank can take a big bite out of your bank account. By properly caring for your septic tank and sewer lines, your tank will last for many years.
About the Author: Environmentally friendly advanced septic tanks system manufacturer provides residential, commercial and mobile septic systems. When doing research for wastewater treatment, consider Pinnacle Environmental Technologies INC.
Source: isnare.com
Permanent Link: isnare.com/?aid=499046&ca=Home+Management